IMPROVING THE STRENGTH OF THERMOPLASTIC POLYMER MATERIALS
Keywords:
Thermoplastic, Polymer, Blend, Strength, Polymer crystallization, crosslinking.Abstract
Thermoplastic polymers are widely used in various industries due to their ease of processing and versatile properties. However, their relatively low strength and mechanical performance limits their applications in demanding environments. This research focuses on enhancing the strength of thermoplastic polymer materials through the incorporation of various reinforcement techniques, such as fiber reinforcement, nanomaterial integration, and polymer blending. The study investigates the impact of these methods on the mechanical, thermal, and chemical properties of the polymers, aiming to develop materials with improved load-bearing capacity, durability, and overall performance. The results are expected to contribute to advancing the use of thermoplastic polymers in high-performance applications, from automotive to aerospace industries.
Downloads
References
Adaxamjonovich, O. Z. A., & Jaksilikovna, O. G. (2024). THE IMPORTANCE OF CALCIUM OXIDE IN THE PRODUCTION OF PORTLAND CEMENT CLINKER AND THE STEPS OF THE PRODUCTION PROCESSES. Ethiopian International Journal of Multidisciplinary Research, 11(03), 292-295.
Rustamjan ogli, B. A., & Odiljon ogli, D. S. (2024). IKKILAMCHI MATERIALLAR ASOSIDA ZARBGA CHIDAMLI PODSHIPNIKLAR UCHUN TEMIR KOMPOZIT MATERIALLAR OLISH TEXNOLOGIYASINI ISHLAB CHIQISH. TANQIDIY NAZAR, TAHLILIY TAFAKKUR VA INNOVATSION G ‘OYALAR, 1(1), 2121-214.
Koraboyevna, A. S. (2024). STUDY OF SURFACE FINISHING USING A MACRO-SAMPLE. Ethiopian International Journal of Multidisciplinary Research, 11(04), 301-306.
Muhiddinov, N, Z., & Raxmatullayev, M, M., (2021). To improve the technology of obtaining polymer composite materials on the basis of fillers that provide special properties. Texas Journal of Multidisciplinary Studies, 3, 168–171.
Kh, A. U. (2024). METHODS OF PROCESSING CRUDE OIL AND AREAS OF APPLICATION OF THE PRODUCTS OBTAINED. Ethiopian International Journal of Multidisciplinary Research, 11(04), 481-485
Tursunali o‘g‘li, Y. F., & Umidbek Turg‘unboy o‘g, X. (2024, April). ASSESSMENT OF TECHNOLOGICAL PROPERTIES OF MILLING TOOLS. In Proceedings of International Conference on Educational Discoveries and Humanities (Vol. 3, No. 5, pp. 281-285).
Хасанов, Ж. (2024). ANALYSIS OF STRUCTURAL CHANGES AS A RESULT OF MODIFIERS INTRODUCED IN THE PROCESS OF LIQUEFACTION OF GRAY CAST IRON. I. Научно-технический журнал «Машиностроение», (2), 34-39.
Adaxamjonovich, O. Z. A. (2024). PRODUCTION OF COMPOSITE MATERIAL USING INDUSTRIAL WASTE. AMERICAN JOURNAL OF MULTIDISCIPLINARY BULLETIN, 2(3), 129-136.
Koraboyevna, A. S. (2024). OPTICAL METALLOGRAPHY. OPTICAL METALLOGRAPHIC MICROSCOPES. International journal of artificial intelligence, 4(03), 145-150.
Otaqo‘Ziyev, A., & Axunjonov, A. (2023, September). Enrichment Of The Chemical Composition Of Cement Using Foundry Waste. In " ONLINE-CONFERENCES" PLATFORM (pp. 379-380).
Аbrorjon Toshturg’un o’g, M. (2024). BOLАLАR VА OʼSMIRLАRDА ZOʼRIQISH BOSH OGʼRIGʼINING YOSHGА BOGʼLIQ XUSUSIYATLАRI: Marupov Аbrorjon Toshturg’un o’g’li, Ahmatov Bahodir. Лучшие интеллектуальные исследования, 22(3), 207-212.
Abrorjon, M. (2024). AGE-RELATED FEATURES OF TENSION HEADACHES IN CHILDREN AND ADOLESCENTS. PEDAGOG, 7(6), 395-398.
Abdumuxtor o‘g‘li, M. D., & Abrorjon Toshturg‘un o‘g, M. (2024). ALSGEYMER KASALLIGINING KELIB CHIQISHI, SABABLARI, BOSQICHLARI VA DAVOLASH USULLARINI OPTIMALLASHTIRISH. AMERICAN JOURNAL OF APPLIED MEDICAL SCIENCE, 2(4), 26-30.
